DuroSpan®
DuroSpan insulation is a Type 1, closed cell and moisture resistant insulation with a green film laminated to one side, and a silver film on the other side. With an R-value of 3.9 per inch, DuroSpan insulation is ideal for adding energy efficiency and cost savings to any project. It is easy to install and can be used in many applications; exterior sheathing, continuous insulation, basement floor, under slab insulation and cathedral ceilings. The addition of the laminated film to the top and bottom surfaces of DuroSpan insulation board provides a more durable product that is less susceptible to damage.
The reflective facer on DuroSpan insulation contains a thin layer of foil embedded within the film. The reflective facer does not increase the R-value of DuroSpan insulation.
DuroSpan insulation complies with the requirements of ASTM C578.
- Available in 4x8 ft sheets
- ¾, 1, 1 ½, 2 in. plus special order sizes
- Meets all building code requirements
- Meets ASTM C578, Type 1
- Laminated/branded product with thin film on both sides
- Thermal resistance - R-value 3.9/inch
- Closed cell insulation resists moisture
- For Retrofit and New Construction
Material Properties of DuroSpan® Insulation
Material Property | Units | Test Method | C578, Type I Values | |
---|---|---|---|---|
Nominal Density | pcf | NA | 1.00 | |
Compressive Resistance Minimum @ 10% Deformation |
psi | D1621 | 10.0 | |
R-value per inch thickness at mean temperature |
40 °F | ft2•hr•0F/Btu | C518 | 4.2 |
75 °F | 3.9 | |||
Water Vapour Permeance Maximum - 25mm (1 inch) thickness |
Perm | E96 | 5.0 | |
Flexural Strength Minimum |
psi | C203 | 25.0 | |
Dimensional Stability Maximum, 7 Days @ 70± 2℃ (158±40F) |
% linear change | D2126 | 2.0 | |
Water Absorption Maximum |
% by volume | D2861 | 4.0 | |
Oxygen Index Minimum |
volume % | D2863 | 24 | |
Density Minimum |
pcf | C303 | 0.90 |
PIB 207 - Recognition of CCMC Product Evaluations
PIB 219 - Environmental Issues Related to EPS Manufacture
PIB 226 - NRCan EnerGuide Rating System
PIB 231 - Canadian Certification Listings for Plasti-Fab Insulation
PIB 232 - DuroFoam Insulation - NBC 2010 Insulating Sheathing Installation Requirements
PIB 240 - PlastiSpan and DuroFoam Insulation - LEED Point Distribution
PIB 249 - DuroFoam Insulation for Basement Applications
PIB 250 - DuroFoam Insulation as Insulating Sheathing - 2012 OBC
PIB 253 - Facts About Thermal Resistance of Reflective Insulation
PIB 275 - NBC 2010 - DuroFoam Insulation for Interior Basement Applications
PIB 281 - DuroFoam Insulation Used as Insulating Sheathing - NBC 2010
PIB 297 - Drying Potential of EPS and XPS Insulation Exposed to Environmental Cycling
PIB 298 - DuroFoam Insulation for Roof Insulation Applications
PIB 306 - SDS - Plasti-Fab EPS Products for Construction Applications