Energreen®
Energreen insulation is a Type 1, Type 2, and Type 3 closed cell and moisture resistant insulation. Energreen insulation is ideal for adding energy efficiency and cost savings to any project. It is easy to install and can be used in many applications; exterior sheathing, continuous insulation, basement floor, under slab insulation and cathedral ceilings. The addition of the laminated film to the top and bottom surfaces of Energreen insulation board provides a more durable product that is less susceptible to damage.
Energreen insulation complies with the requirements of CAN ULC S701.1, Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering, the National Standard of Canada for expanded polystyrene (EPS) insulation.
- Available in 4x8 ft, 2 ft high bundles
- ¾, 1, 1 ½, 2 in. plus special order sizes
- Meets all building code requirements
- Meets CAN ULC S701.1, Type 1,2,3
- Laminated/branded product with thin film on both sides
- Closed cell insulation resists moisture
- For Retrofit and New Construction
Material Properties of Energreen® Insulation
| Material Property | Units | CAN/ULC-S701.1 Type | ||
|---|---|---|---|---|
| 1 | 2 | 3 | ||
| Thermal Resistance Minimum per unit of thickness ASTM C518 |
RSI per 25 mm - m2 • 0C/W R-value per inch - (ft2•h•0F/BTU) |
0.65 (3.75) |
0.70 (4.04) |
0.74 (4.27) |
| Compressive Resistance Minimum @ 10% Deformation ASTM D1621 |
kPa (psi) |
70 (10) |
110 (16) |
170 (25) |
| Water Vapour Permeance Maximum ASTM E96 |
ng/(Pa.s.m2) (Perms) |
30 (0.5) |
30 (0.5) |
30 (0.5) |
| Surface Burning Characteristics Classification or Rating CAN/ULC S102.2 |
Flame Spread Smoke Developed |
290 over 500 |
||
PIB 207 - Recognition of CCMC Product Evaluations
PIB 219 - Environmental Issues Related to EPS Manufacture
PIB 226 - NRCan EnerGuide Rating System
PIB 231 - Canadian Certification Listings for Plasti-Fab Insulation
Energreen® Insulation Videos
Energreen® Insulation Projects
